英國GRIMM格林進口高壓鍋爐給水泵 UK GRIMM Imported high pressure boiler feed pump

英國GRIMM格林進口高壓鍋爐給水泵概述：
          進口高壓鍋爐給水泵源于英國格林先進技術，主要為200～1200MW火力發電機組配套，輸送介質溫度≤210℃；泵組配套使用，調整運行，效率高、可靠性好，保證壽命40年。

英國GRIMM格林進口高壓鍋爐給水泵結構特點：

          進口高壓鍋爐給水泵為雙殼體臥式多級離心泵，剛性轉子，臨界轉速11000r/min；外殼體水平中心支撐，過流部位和配合面堆焊奧氏體不銹鋼，提高壽命；內殼體徑向部分，采用雙平衡鼓對軸向力水力平衡，容積損失較小。
          泵采用徑向滑動軸承支撐，雙向推力滑動軸承可平衡瞬態殘余軸向力；稀油強制潤滑。徑向軸承均為機加工成型的四油軸承或圓柱軸承，工作狀態極佳。潤滑油由驅動汽輪機、調整裝置(液力偶合器/齒輪箱等)或稀油站提供。
          軸封為流體動力型機械密封，有快裝可選。介質自循環經冷卻和過濾后沖洗密封動靜部分，外設二次回路其冷卻。

英國GRIMM格林進口高壓鍋爐給水泵主要參數：

流量：350-2400m3/h
揚程：1700-3100m
進口口徑：200-300mm
出口口徑：150-250mm
NPSHFr：22-125m
效率：75-84%
轉速：5150-6435r/min
功率：3200-21000kw
材質：鑄鋼、不銹鋼

英國GRIMM格林進口高壓鍋爐給水泵適用范圍：
?? 適用于中、低壓鍋爐給水，工廠、城市高揚程輸水。輸送介質溫度≤210℃。

UK GRIMM Imported high pressure boiler feed pump summary:

        High pressure boiler feed water pump from the British Green advanced technology, mainly for supporting the 200 ~ 1200MW thermal power generating units, transmission medium temperature less than 210 DEG C; pump group matched adjustment operation, high efficiency, good reliability, assurance of 40 years of life.

UK GRIMM Imported high pressure boiler feed pump structure characteristics:       

       High pressure boiler feed pump is a double shell horizontal multistage centrifugal pump, rigid rotor, critical speed 11000r/min; shell level center support, flow area and with the surface welding of austenitic stainless steel, improve the life of the inner shell; radial part adopts the double balanced drum on the axial force of hydraulic balance, small volume loss.

        The pump is supported by radial sliding bearings, and bidirectional thrust bearings can balance the transient residual axial forces. Radial bearings are machined four oil bearings or cylindrical bearings, in excellent working condition. The lubricating oil is supplied by a drive turbine, an adjustment device (hydraulic coupling / gearbox, etc.) or a thin oil station.

        Shaft seal is fluid power type, mechanical seal, quick installation optional. The medium self circulation, after cooling and filtering, seals the static and dynamic parts, and the peripheral two circuit is cooled.

UK GRIMM Imported high pressure boiler feed pump technical parameter:

Flow rate: 350-2400m3/h

Lift: 1700-3100m

Import caliber: 200-300mm

Export caliber: 150-250mm

NPSHFr:22-125m

Efficiency: 75-84%

Speed: 5150-6435r/min

Power: 3200-21000kw

Material: cast steel, stainless steel

UK GRIMM Imported high pressure boiler feed pump scope of application:

       Applicable to medium and low pressure boiler feed water, factory and city high water delivery. The transmission medium temperature are less than 210.